Electrical Actuator Op. Ball Valve

Technical Specification – Actuator
Basic ratings Torque Range	30 ~ 200 Nm
Enclosure	Aluminum alloy, Weather proof IP 67
Duty cycle	S2 (15 to 30 min) ON/OFF, S4 (300 to 1200 stars/hr)
Stroke	0° ~ 90° (Optional 0° ~ 270°)
Electrical ratings Power supply	24V AC/DC or 1Ph 110/220 V AC 50/ 60 Hz (For EQ0030 : 220V AC or 24V DC)
Motor	Squirrel cage induction motor
Motor Insulation Class F Limit switch	1 x SPDT (220V AC, 10 A) for each Open/ Close
Auxiliary limit switch	1 x SPDT (220V AC, 10 A) for each Open/ Close
Space Heater	7~10W (110/220V AC)
Aux features Motor thermal protector	In Built Thermal protector – Open: 120°C±5°C, Close: 85°C±15°C
Manual operation	Wrench type mechanical manual override
Mechanical position indicator	Continuous mechanical position indicator
Mechanical Stopper	2 X External adjustable bolts ± 5°
Self locking	Self locking by worm and worm gear
Cable gland	2xM18
Installation Mounting base	ISO5211
Output drive type	Double square female shaft
Ambient conditions Painting/Surface protection	Epoxy dry powder
Ambient temperature	-20°C ~ +70°C
Humidity	Max 90% RH
Vibration	XYZ 10g, 0.2~34 Hz, 30 minutes

Technical Specifications – Valve
Body	ASTM A 216 GR. WCB / ASTM A 351 GR. CF8 / ASTM A 351 GR. CF8M / CF3M
Ball	SS 304 / SS 304 / SS316 / SS 316L
Seal & Seating	PTFE
Stem	SS 410 / SS 304 / SS 316
Gland Packing	PTFE
Gland	SS 410 / SS 304 / SS 316
Class	ASA 150 / ASA 300 #

---

Electrical Actuator Op. Butterfly Valve

Technical Specification – ACTUATOR
Type	Rack and Pinion type
Actuation	Double Acting / Single Acting
Mounting Std	ISO 5211 AN International Standard
Pneumatic Connection	NAMUR Standard

Technical Specification
Body	Cast Iron / Cast Steel / SS 304 / SS 316
Disc	CF8 / CF8M / S.G. Iron / Teflon Coated
Seat	Nitrile / EPDM / Viton (Replaceable Seal)
Shaft	AISI 410 / CF8 / CF8M
Valve Type	Centric Disc Butterfly Valve with a single piece rubber lined valve
Body Type	Short Wafer (Sandwiched Between Flanges)
Seat Type	Integrally Moulded with body
End Connection	Wafer Sandwiched (Lug type on request)
Pressure Rating	PN 10 / PN 16 (On Request)
Oper. Temp. Range	-25 °C to 130 °C (Depending on MOC)
Seat Leakage	Tight shut off

---